• SmartUF-5040

    SmartUF, Ultrafiltration System

    The proposed systems, designated as smartUF-4014, -5024 and-5040 are identical in construction except for the size of installed UF membrane area. They are meant to purify available fresh water to WHO* standards or better. Excessive levels of solids, but also TDS (Total Dissolved Solids) such as Chlorides, Nitrates, SO4, Arsenic, Fluoride, Heavy Metals, and Pesticides etc. may be removed by additional treatment steps, depending on their level and nature.

    Pumps for feed-water may be selected according to local conditions and customers’ requirements and can be supplied by us or purchased locally to our specifications.  For surface waters a pre-filter needs to be installed as per our instructions.

    In case feed-water is available in gravity feed with sufficient static head, such as in mountainous areas, the feed pump may be eliminated and replaced by pressure-regulator.

    Following the philosophy that our systems must work with minimum maintenance and basic knowledge of operators, the proposed equipment has fully automatic, micro-processor controlled operation and backwashing, warranting constant high flow and low down-times. The smartly designed backwash process eliminates the need for backwash-pump and tank, yet warrants the water used for backwashing to be clean and bacteria-free.

    Technical specification sUF-5040
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine short term 5 mg/L
    long term 300 mg/L
    Operating mode dead-end, up flow
    Operating temperature <40 ˚C
    Membrane material hollow fiber 1.0 mm PAN
    Membrane area 2x 6.25 m2
    Flow @ 100 kPa TMP / 25 ˚C
    – clean water
    – piped water
    42 L/min
    13.5 L/min
    Dimensions (LxHxW) 1660 x 300 x 250 mm
    Weight 29 kg
    Electrical connections 100-240V~50/60Hz –
    6V= / 3 W
    Technical specification sUF-5040
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine short term 5 mg/L long term 300 mg/L
    Operating mode dead-end, up flow
    Operating temperature <40 ˚C
    Membrane material hollow fiber 1.0 mm PAN
    Membrane area 2x 6.25 m2
    Flow @ 100 kPa TMP / 25 ˚C - clean water - piped water 42 L/min 13.5 L/min
    Dimensions (LxHxW) 1660 x 300 x 250 mm
    Weight 29 kg
    Electrical connections 100-240V~50/60Hz – 6V= / 3 W

  • SmartUF-5024

    Technical specification sUF-5024
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine short term 5 mg/L
    long term 300 mg/L
    Operating mode dead-end, up flow
    Operating temperature <40 ˚C
    Membrane material hollow fiber 1.0 mm PAN
    Membrane area 2x 3.8 m2
    Flow @ 100 kPa TMP / 25 ˚C
    – clean water
    – piped water
    25 L/min
    8.2 L/min
    Dimensions (LxHxW) 1290 x 300 x 250 mm
    Weight 22 kg
    Electrical connections 100-240V~50/60Hz –
    6V= / 3 W
    Technical specification sUF-5024
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine short term 5 mg/L long term 300 mg/L
    Operating mode dead-end, up flow
    Operating temperature <40 ˚C
    Membrane material hollow fiber 1.0 mm PAN
    Membrane area 2x 3.8 m2
    Flow @ 100 kPa TMP / 25 ˚C - clean water - piped water 25 L/min 8.2 L/min
    Dimensions (LxHxW) 1290 x 300 x 250 mm
    Weight 22 kg
    Electrical connections 100-240V~50/60Hz – 6V= / 3 W

  • SmartUF-4014

    Technical specification sUF-4014BOX
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine short term 5 mg/L
    long term 300 mg/L
    Operating mode dead-end, up flow
    Operating temperature <40 ˚C
    Membrane material hollow fiber 1.0 mm PAN
    Membrane area 2x 1.5 m2
    Flow @ 100 kPa TMP / 25 ˚C
    – clean water
    – piped water
    10 L/min
    3.3 L/min
    Dimensions (LxHxW) 500 x 265 x 220 mm
    Weight 12 kg
    Electrical connections 100-240V~50/60Hz –
    6V= / 3 W
    Technical specification sUF-4014BOX
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine short term 5 mg/L long term 300 mg/L
    Operating mode dead-end, up flow
    Operating temperature <40 ˚C
    Membrane material hollow fiber 1.0 mm PAN
    Membrane area 2x 1.5 m2
    Flow @ 100 kPa TMP / 25 ˚C - clean water - piped water 10 L/min 3.3 L/min
    Dimensions (LxHxW) 500 x 265 x 220 mm
    Weight 12 kg
    Electrical connections 100-240V~50/60Hz – 6V= / 3 W

  • Villagepump

    Villagepump 500 The leading solution for rural areas without the need of an external energy source!

    Each Villagepump employs multi-stage filtering that reduce diseases by removing waterborne pathogens that can cause diarrhea, dysentery, cholera and hepatitis. Production rates are over 4 m3 per day, all of the qualities that meets WHO standards.

    Multiple applications

    As the name implies, it can be implemented in or near villages, but is especially effective in combination with:

    • Health care centers
    • Educational centers
    • (Deep) wells
    • Water Kiosks or comparable business ideas

    Truly innovative

    • 500 liters of pure, clean and cool drinking water per hour
    • WHO standard water quality achieved
    • No external power source
    • Ideal for small communities of up to 500 people where fresh surface water is available
    • Completely mechanical, self-cleaning (automatic backwash) and mobile
    • Modular design with minimal maintenance needs or costs

    Impressive performance

    • Virus, bacteria and cyst removal
    • Active carbon filter restores odor and taste (Optional)
    • One VILLAGEPUMP 500 has capacity of at least 500 l/hour or approximately 4 m3 per day
    • Long service life thanks to automatic backwash and built-in chlorine dispenser
    • Regular service required only once every year
    Villagepump 500 The leading solution for rural areas without the need of an external energy source! Each Villagepump employs multi-stage filtering that reduce diseases by removing waterborne pathogens that can cause diarrhea, dysentery, cholera and hepatitis. Production rates are over 4 m3 per day, all of the qualities that meets WHO standards. Multiple applications As the name implies, it can be implemented in or near villages, but is especially effective in combination with:
    • Health care centers
    • Educational centers
    • (Deep) wells
    • Water Kiosks or comparable business ideas
    Truly innovative
    • 500 liters of pure, clean and cool drinking water per hour
    • WHO standard water quality achieved
    • No external power source
    • Ideal for small communities of up to 500 people where fresh surface water is available
    • Completely mechanical, self-cleaning (automatic backwash) and mobile
    • Modular design with minimal maintenance needs or costs
    Impressive performance
    • Virus, bacteria and cyst removal
    • Active carbon filter restores odor and taste (Optional)
    • One VILLAGEPUMP 500 has capacity of at least 500 l/hour or approximately 4 m3 per day
    • Long service life thanks to automatic backwash and built-in chlorine dispenser
    • Regular service required only once every year

  • Residential RO Systems

    Residential RO Systems

    Reverse Osmosis Systems from 50GPD to 100GPD

    The smart, clean, residential RO systems allows for convenient installation, user-friendly operation, and ease of maintenance. These systems feature a high quality booster pump, high quality membrane, and quick connect fittings.

           Benefits

    • Fully equipped and customizable
    • Individually tested and preserved
    • Low operation and maintenance costs
    • Components are easily accessible
    • Easy maintenance and servicing
    • 1-year limited warranty

           Features

    • Booster pump
    • Filter Housings
    • Sediment, Carbon, and GAC filter
    • GAC inline filter
    • 50/75 GPD membrane
    • 3.2 gallon storage tank
    • Quick connect fittings
    • Long reach faucet
    Residential RO Systems Reverse Osmosis Systems from 50GPD to 100GPD The smart, clean, residential RO systems allows for convenient installation, user-friendly operation, and ease of maintenance. These systems feature a high quality booster pump, high quality membrane, and quick connect fittings.        Benefits
    • Fully equipped and customizable
    • Individually tested and preserved
    • Low operation and maintenance costs
    • Components are easily accessible
    • Easy maintenance and servicing
    • 1-year limited warranty
           Features
    • Booster pump
    • Filter Housings
    • Sediment, Carbon, and GAC filter
    • GAC inline filter
    • 50/75 GPD membrane
    • 3.2 gallon storage tank
    • Quick connect fittings
    • Long reach faucet

  • Commercial RO Systems

    SAKOR International offers an assortment of both basic and premium designs of pure water systems for commercial uses.

    The smart, clean, and practical industrial allows for convenient installation, user-friendly operation, and ease of maintenance. These skid-mounted, packaged systems are pre-plumbed and pre-wired complete on a steel frame with panel-mounted pressure and flow instrumentation allowing for straight forward system monitoring and control. EWP-USA offers an assortment of both basic and premium designs of pure water systems that can be private labeled or customized.

    Benefits

    • Fully equipped and customizable
    • Individually tested and preserved
    • Expandable and skid mounted
    • Low operation and maintenance costs
    • Components are easily accessible
    • Easy maintenance and servicing
    • Pre-plumbed, wired and assembled
    • 1-year limited warranty

    Applications

    Municipal, Waste water, Hotel, Military, Hospital, Food and beverage, Pharmaceutical, Mining, Power and energy, Refinery, Restaurants, Agriculture, Boiler feed, Disaster relief, and etc.

    SAKOR International offers an assortment of both basic and premium designs of pure water systems for commercial uses. The smart, clean, and practical industrial allows for convenient installation, user-friendly operation, and ease of maintenance. These skid-mounted, packaged systems are pre-plumbed and pre-wired complete on a steel frame with panel-mounted pressure and flow instrumentation allowing for straight forward system monitoring and control. EWP-USA offers an assortment of both basic and premium designs of pure water systems that can be private labeled or customized. Benefits
    • Fully equipped and customizable
    • Individually tested and preserved
    • Expandable and skid mounted
    • Low operation and maintenance costs
    • Components are easily accessible
    • Easy maintenance and servicing
    • Pre-plumbed, wired and assembled
    • 1-year limited warranty
    Applications Municipal, Waste water, Hotel, Military, Hospital, Food and beverage, Pharmaceutical, Mining, Power and energy, Refinery, Restaurants, Agriculture, Boiler feed, Disaster relief, and etc.

  • RIO Zuni

    This compact, easy to install and operate on-site chemical generator is designed for minimal maintenance and ultimate simplicity. The RIO Zuni features less than 3 maintenance hours in 6 months, an extremely small footprint, can handle a higher water hardness with minimal conditioning, and has an optional integrated brine tank and remote monitoring capabilities. Just load with salt and let the RIO Zuni do the dirty work for you!

    This compact, easy to install and operate on-site chemical generator is designed for minimal maintenance and ultimate simplicity. The RIO Zuni features less than 3 maintenance hours in 6 months, an extremely small footprint, can handle a higher water hardness with minimal conditioning, and has an optional integrated brine tank and remote monitoring capabilities. Just load with salt and let the RIO Zuni do the dirty work for you!

  • AE

    AE™ Specifications

    The AE is an “Automated” and “Economical” on-site generation system ideal for industrial and remote applications. The system activates based upon a level sensor measuring the volume of oxidant in a storage tank. After connection to water and a power source, the only routine operator service requirements are to load salt into the brine generator.

    AE™ Specifications The AE is an “Automated” and “Economical” on-site generation system ideal for industrial and remote applications. The system activates based upon a level sensor measuring the volume of oxidant in a storage tank. After connection to water and a power source, the only routine operator service requirements are to load salt into the brine generator.

  • EKV CPU

    Features:
    1. Built-in CPU controller to control pump system
    2. Auto dry-running shutdown function- When water outage occurs, the pump will auto shutdown in 60 seconds, to avoid motor burnout due to dry running.
    3. Silent operation, and stable water pressure provided. 
    4. High performance, compact design for saving space.
    5. Auto boost water pressure and water supply when users open faucets, showers, etc.
    6. EKV is designed for bi-voltage, 110/220V (only for 60HZ model), the installer can choose the suitable voltage manually. 
    7. When installed outdoors, the pump exposed to wind and rain, it will affect life span of electronic units, such as CPU board. A protector cover for the pump is the best choice, which protects pump from rain and dust to extend the life time.

    Operating Conditions:
    1.Ambient Temp.: 0~+40C。
    2. Relative Humidity: Max. 85% (RH) 。
    3. Liquid Temp. : 0~+40C。
    4. Working pressure: Max. 5 kg/cm2。
    5. Before running, Ensure inlet pressure is lower than setting activation running pressure.
    6. For clean water without abrasives. No transfer underground water or Sea water.

    Specifications:
    1.Output: 1/4HP; 1/2HP
    2.Motor Protection: IP54
    3. Motor Insulation: B
    4.Voltage: Single phase bi-voltage 110/220V (60HZ)
    Single phase 220~240V (50HZ)
    5. Inlet/Outlet: 3/4” or 1”
    6. Max. Head:  28M
    7. Max. Capacity: 70LPM

    Features: 1. Built-in CPU controller to control pump system 2. Auto dry-running shutdown function- When water outage occurs, the pump will auto shutdown in 60 seconds, to avoid motor burnout due to dry running. 3. Silent operation, and stable water pressure provided.  4. High performance, compact design for saving space. 5. Auto boost water pressure and water supply when users open faucets, showers, etc. 6. EKV is designed for bi-voltage, 110/220V (only for 60HZ model), the installer can choose the suitable voltage manually.  7. When installed outdoors, the pump exposed to wind and rain, it will affect life span of electronic units, such as CPU board. A protector cover for the pump is the best choice, which protects pump from rain and dust to extend the life time. Operating Conditions: 1.Ambient Temp.: 0~+40C。 2. Relative Humidity: Max. 85% (RH) 。 3. Liquid Temp. : 0~+40C。 4. Working pressure: Max. 5 kg/cm2。 5. Before running, Ensure inlet pressure is lower than setting activation running pressure. 6. For clean water without abrasives. No transfer underground water or Sea water. Specifications: 1.Output: 1/4HP; 1/2HP 2.Motor Protection: IP54 3. Motor Insulation: B 4.Voltage: Single phase bi-voltage 110/220V (60HZ) Single phase 220~240V (50HZ) 5. Inlet/Outlet: 3/4” or 1” 6. Max. Head:  28M 7. Max. Capacity: 70LPM

  • ECM SUS

    Applications:

    1. Water treatment processes
    2. Industrial cleaners and dishwashers
    3. Pressure boosting systems
    4. Heating and cooling for industrial processes
    5. Air-conditioning systems, Air freshening, heater devices.
    6. Water supply and boosting (drinking water with light chlorinated water)
    7. Fertilization systems
    8. Domestic and household use
    Applications:
    1. Water treatment processes
    2. Industrial cleaners and dishwashers
    3. Pressure boosting systems
    4. Heating and cooling for industrial processes
    5. Air-conditioning systems, Air freshening, heater devices.
    6. Water supply and boosting (drinking water with light chlorinated water)
    7. Fertilization systems
    8. Domestic and household use

  • EFM Submersible Mixer Pump

    Features:

    1. Equipped with overload protector to protect motor from burnout easily due to abnormal conditions occurs.
    2. Special Mixer impeller design to mix and agitate impurities in the water efficiently.
    3. Adopts SIC/SIC (Silicon Carbide) dual mechanical seals to ensure best seal effect and reduce abrasion from waste water.
    4. Guide rail device is available for safety purpose.


    Applications:  

    1. Wastewater treatment of any industries.
    2. River, ponds, lakes dredging.
    3. Artificial water flow of amusement facilities.
    4. Mix and agitate impurities in the water.

    Operating Conditions:

    1. Ambient Temperature: +0~+40℃
    2. Liquid Temperature: +0~+40℃
    3. 24Hours continuously running is allowed.

    Specifications:

    1. Output: 1/2HP~3HP
    2. Motor Protection: IP68
    3. Insulation: F
    4. Pole: 4P
    5. Voltage: 3phase220 or 380V*60HZ; 3phase380~415V*50HZ (No single phase)
    6. Rated Capacity Range: 1.8~6.8 M3/Hr
    7. Rated Flow Speed Range:  1.78~3.5 m/s
    Features:
    1. Equipped with overload protector to protect motor from burnout easily due to abnormal conditions occurs.
    2. Special Mixer impeller design to mix and agitate impurities in the water efficiently.
    3. Adopts SIC/SIC (Silicon Carbide) dual mechanical seals to ensure best seal effect and reduce abrasion from waste water.
    4. Guide rail device is available for safety purpose.
    Applications:  
    1. Wastewater treatment of any industries.
    2. River, ponds, lakes dredging.
    3. Artificial water flow of amusement facilities.
    4. Mix and agitate impurities in the water.
    Operating Conditions:
    1. Ambient Temperature: +0~+40℃
    2. Liquid Temperature: +0~+40℃
    3. 24Hours continuously running is allowed.
    Specifications:
    1. Output: 1/2HP~3HP
    2. Motor Protection: IP68
    3. Insulation: F
    4. Pole: 4P
    5. Voltage: 3phase220 or 380V*60HZ; 3phase380~415V*50HZ (No single phase)
    6. Rated Capacity Range: 1.8~6.8 M3/Hr
    7. Rated Flow Speed Range:  1.78~3.5 m/s

  • Portable Flocculator – FP4

    FP4 is a portable model, the ideal solution for on-site analysis. It can be powered by a battery or car cigarette lighter.

    With 4 different positions, it is able to test different samples at the same time at a maximum speed of 200 rpm, whilst the possibility to switch on a central light simplifies the reading.
    Height adjustment option for the stirring blades during operation and continuously variable speed (if desired) increase its capabilities.

    In addition, the user can program the operating time for unattended operation. When time expires, stirring will be stopped automatically.

    The carrying case, an optional accessory, is ideal for storing or transporting the unit.

    GENERAL FEATURES
    Construction material: Epoxy painted metal structure
    Disconnectable central light
    Stainless steel stirring rods: adjustable in height by a self blocking chuck
    DC gear motor
    Monoselector: same speed for each rod
    Number of stirring rods: 4
    Power: 6 W
    Power supply: 100 – 240 V / 50-60 Hz
    Weight: 4,8 Kg (10.6 lb)
    Dimensions (WxHxD) : 250x320x250 mm (9.8×12.6×9.8 in)
    PERFORMANCE
    Timer: from 0 to 30 minutes (or continuous)
    Electronic speed control: 20 – 40 – 50 – 100 – 200 rpm
    FP4 is a portable model, the ideal solution for on-site analysis. It can be powered by a battery or car cigarette lighter. With 4 different positions, it is able to test different samples at the same time at a maximum speed of 200 rpm, whilst the possibility to switch on a central light simplifies the reading. Height adjustment option for the stirring blades during operation and continuously variable speed (if desired) increase its capabilities. In addition, the user can program the operating time for unattended operation. When time expires, stirring will be stopped automatically. The carrying case, an optional accessory, is ideal for storing or transporting the unit.
    GENERAL FEATURES
    Construction material: Epoxy painted metal structure
    Disconnectable central light
    Stainless steel stirring rods: adjustable in height by a self blocking chuck
    DC gear motor
    Monoselector: same speed for each rod
    Number of stirring rods: 4
    Power: 6 W
    Power supply: 100 - 240 V / 50-60 Hz
    Weight: 4,8 Kg (10.6 lb)
    Dimensions (WxHxD) : 250x320x250 mm (9.8x12.6x9.8 in)
    PERFORMANCE
    Timer: from 0 to 30 minutes (or continuous)
    Electronic speed control: 20 - 40 - 50 - 100 - 200 rpm

  • DR3900 Benchtop Spectrophotometer

    Simple Preparation

    TNTplus vials use DosiCaps that are easier to use than Powder Pillows or Liquid Reagents, without any risk of contamination.
    The boxes and vials are color-coded for fast and easy parameter and range recognition of exactly the test you need.
    Step-by-step illustrated test methods are printed on the box as quick reference or can be called up in the instrument menu.

    Specification Detail
    Beam Height: 10 mm
    Data Logger: 2000 measured values (Result, Date, Time, Sample ID, User ID)
    Dimensions (H x W x D):151 mm x 350 mm x 255 mm
    Display: 7″ TFT
    Display Resolution: WVGA (800 pix x 480 pix)
    Display Size: 7 inch
    Display Type: Colored touch screen
    Enclosure Rating: IP30
    Includes: Adapter “A” for 1″ round + Accuvac/1 cm rectangular cuvettes, manual in m 5 languages (GB, D, F, I, E), power supply 100 – 240V, 47 – 63Hz.
    Max. operating humidity: 80 %
    Max. Storage Humidity: 80 %
    Operating Conditions: 10 °C to 40 °C
    Operating Mode: Transmittance (%), Absorbance and Concentration, Scanning
    Optical System: Reference beam, spectral
    Photometric Accuracy: 5 mAbs at 0.0 to 0.5 Abs
    Photometric Accuracy 2: 1 % at 0.50 to 2.0 Abs
    Photometric Linearity:

     

    < 0.5% to 2 Abs

    2 Abs with neutral glass at 546 nm

    Photometric Measuring Range: ± 3.0 Abs (wavelength range 340 to 900 nm)
    Power Requirements: With external power supply
    Power Requirements (Hz): 50/60 Hz
    Power Requirements (Voltage): 110 – 240 V AC
    Power Supply: Benchtop Power Supply
    Preprogrammed Methods: > 240
    Sample Cell Compatibility: Rectangular: 10, 20, 30, 50 mm, 1 inch; round: 13 mm, 16 mm, 1 inch
    Spectral Bandwidth: 5 nm ± 1 nm
    Storage Conditions: -30 °C to 60 °C
    Stray Light: < 0.1% T at 340 nm with NaNO2

    Simple Preparation

    TNTplus vials use DosiCaps that are easier to use than Powder Pillows or Liquid Reagents, without any risk of contamination. The boxes and vials are color-coded for fast and easy parameter and range recognition of exactly the test you need. Step-by-step illustrated test methods are printed on the box as quick reference or can be called up in the instrument menu.
    Specification Detail
    Beam Height: 10 mm
    Data Logger: 2000 measured values (Result, Date, Time, Sample ID, User ID)
    Dimensions (H x W x D):151 mm x 350 mm x 255 mm
    Display: 7" TFT
    Display Resolution: WVGA (800 pix x 480 pix)
    Display Size: 7 inch
    Display Type: Colored touch screen
    Enclosure Rating: IP30
    Includes: Adapter "A" for 1" round + Accuvac/1 cm rectangular cuvettes, manual in m 5 languages (GB, D, F, I, E), power supply 100 - 240V, 47 - 63Hz.
    Max. operating humidity: 80 %
    Max. Storage Humidity: 80 %
    Operating Conditions: 10 °C to 40 °C
    Operating Mode: Transmittance (%), Absorbance and Concentration, Scanning
    Optical System: Reference beam, spectral
    Photometric Accuracy: 5 mAbs at 0.0 to 0.5 Abs
    Photometric Accuracy 2: 1 % at 0.50 to 2.0 Abs
    Photometric Linearity:   < 0.5% to 2 Abs 2 Abs with neutral glass at 546 nm
    Photometric Measuring Range: ± 3.0 Abs (wavelength range 340 to 900 nm)
    Power Requirements: With external power supply
    Power Requirements (Hz): 50/60 Hz
    Power Requirements (Voltage): 110 - 240 V AC
    Power Supply: Benchtop Power Supply
    Preprogrammed Methods: > 240
    Sample Cell Compatibility: Rectangular: 10, 20, 30, 50 mm, 1 inch; round: 13 mm, 16 mm, 1 inch
    Spectral Bandwidth: 5 nm ± 1 nm
    Storage Conditions: -30 °C to 60 °C
    Stray Light: < 0.1% T at 340 nm with NaNO2

  • 2100Q Portable Turbidimeter

    Easiest calibration and verification with accurate results every time

    The 2100Q Portable Turbidimeter offers unsurpassed ease of use and accuracy in turbidity measurement. Only Hach offers this unique combination of advanced features and measurement innovation, giving you accurate results every time. Compliant with USEPA Method 180.1 design criteria.

    • Easy on-screen assisted calibration and verification
    • Simple data transfer
    • Accurate for rapidly settling samples
    • Convenient data logging
    • Optical system for precision in the field

    Easiest calibration and verification with accurate results every time

    The 2100Q Portable Turbidimeter offers unsurpassed ease of use and accuracy in turbidity measurement. Only Hach offers this unique combination of advanced features and measurement innovation, giving you accurate results every time. Compliant with USEPA Method 180.1 design criteria.
    • Easy on-screen assisted calibration and verification
    • Simple data transfer
    • Accurate for rapidly settling samples
    • Convenient data logging
    • Optical system for precision in the field

  • Lovibond Photometer, MD600

    Highlights

    • Highest/reproducible precision with interference filter
    • Display with background lighting
    • More than 120 pre-programmed methods
    • Automatic selection of wavelength
    • User guidance in German, English, French, Spanish, Italian, Portuguese (BR), Polish, and Indonesian.
    • Buffer for up to 1000 data records
    • More than 35 user-specific methods possible
    • Bluetooth® interface for connection to smart phones and tablets
      (only with MD 610)*
    • iOS® and AndroidTM app for data management and email delivery (only with MD 610)*
    • Infrared interface (only with MD 600)
    • Waterproof housing*
    • Handheld format, portable

    Highlights

    • Highest/reproducible precision with interference filter
    • Display with background lighting
    • More than 120 pre-programmed methods
    • Automatic selection of wavelength
    • User guidance in German, English, French, Spanish, Italian, Portuguese (BR), Polish, and Indonesian.
    • Buffer for up to 1000 data records
    • More than 35 user-specific methods possible
    • Bluetooth® interface for connection to smart phones and tablets (only with MD 610)*
    • iOS® and AndroidTM app for data management and email delivery (only with MD 610)*
    • Infrared interface (only with MD 600)
    • Waterproof housing*
    • Handheld format, portable

  • Basic pH Benchtop Meter, HI 2210 Hanna

    Range pH -2.00 to 16.00 pH
    Range Temperature -9.9 to 120 °C
    Resolution pH 0.01 pH
    Resolution Temperature 0.1 °C
    Accuracy pH ±0.01 pH
    Accuracy Temperature ±0.5 °C (0.0 – 100.0 °C)
    ±1 °C (outside) (excluding probe error)
    pH Calibration automatic, 1 or 2 point with 5 memorized buffer values (pH 4.01, 6.86, 7.01, 9.18, 10.01)
    Temperature Compensation automatic (with HI 7662 probe) or manual from -9.9 to 120 °C
    pH Electrode HI 1131B, glass-body, single junction, refillable, BNC connector, 1 m cable (included)
    Temperature Probe HI 7662 with 1 m (3.3′) cable (included)
    Input Impedance 1012 Ohm
    Power Supply 12 VDC adapter (included)
    Environment 0 to 50°C (32 to 122°F); RH max 95%
    Dimensions 240 x 182 x 74 mm (9.4 x 7.1 x 2.9″)
    Weight 1.1 Kg (2.5 lb); kit with holder 2.5 Kg (5.5 lb)
    Range pH -2.00 to 16.00 pH
    Range Temperature -9.9 to 120 °C
    Resolution pH 0.01 pH
    Resolution Temperature 0.1 °C
    Accuracy pH ±0.01 pH
    Accuracy Temperature ±0.5 °C (0.0 - 100.0 °C) ±1 °C (outside) (excluding probe error)
    pH Calibration automatic, 1 or 2 point with 5 memorized buffer values (pH 4.01, 6.86, 7.01, 9.18, 10.01)
    Temperature Compensation automatic (with HI 7662 probe) or manual from -9.9 to 120 °C
    pH Electrode HI 1131B, glass-body, single junction, refillable, BNC connector, 1 m cable (included)
    Temperature Probe HI 7662 with 1 m (3.3') cable (included)
    Input Impedance 1012 Ohm
    Power Supply 12 VDC adapter (included)
    Environment 0 to 50°C (32 to 122°F); RH max 95%
    Dimensions 240 x 182 x 74 mm (9.4 x 7.1 x 2.9")
    Weight 1.1 Kg (2.5 lb); kit with holder 2.5 Kg (5.5 lb)

  • Shimadzu Balance Model TX-323L

    Model TX323L
    Capacity 320g
    Minimum Display 0.001g
    Repeatability 0.01g

    ±0.02g

    Linearity
    Pan Size (mm) approx. 167(W)×181(D)
    Main Body Dimensions (mm) approx. 200(W)×291(D)×80(H)
    Weight (kg) approx. 2.8kg
    Model TX323L
    Capacity 320g
    Minimum Display 0.001g
    Repeatability 0.01g ±0.02g
    Linearity
    Pan Size (mm) approx. 167(W)×181(D)
    Main Body Dimensions (mm) approx. 200(W)×291(D)×80(H)
    Weight (kg) approx. 2.8kg

  • Membrane Filter mUF-4”/1.5

    Technical specification mUF-4”/1.5
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine long term 5 mg/L
    short term 300 mg/L
    Operating mode dead-end / cross-flow
    Operating temperature <40 ˚C
    Membrane performance 50 kDa MWCO
    1.0 x 0.4 mm
    0.01 µm pore size
    Membrane material double skin hollow fiber
    hydrophilic PAN
    Membrane area 1.5 m2
    Flow @ 100 kPa TMP / 25 ˚C
    – clean water
    – piped water
    >5 L/min
    >1.6 L/min
    Gewicht 2.2 kg
    Technical specification mUF-4”/1.5
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine long term 5 mg/L short term 300 mg/L
    Operating mode dead-end / cross-flow
    Operating temperature <40 ˚C
    Membrane performance 50 kDa MWCO 1.0 x 0.4 mm 0.01 µm pore size
    Membrane material double skin hollow fiber hydrophilic PAN
    Membrane area 1.5 m2
    Flow @ 100 kPa TMP / 25 ˚C - clean water - piped water >5 L/min >1.6 L/min
    Gewicht 2.2 kg

  • Membrane Filter mUF-4”/5

    Technical specification mUF-4”/5
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine long term 5 mg/L
    short term 300 mg/L
    Operating mode dead-end / cross-flow
    Operating temperature <40 ˚C
    Membrane performance 50 kDa MWCO
    1.0 x 0.4 mm
    0.01 µm pore size
    Membrane material double skin hollow fiber
    hydrophilic PAN
    Membrane area 1.5 m2
    Flow @ 100 kPa TMP / 25 ˚C
    – clean water
    – piped water
    >5 L/min
    >1.6 L/min
    Gewicht 3.7 kg
    Technical specification mUF-4”/5
    Maximum pressure 600 kPa
    Normal operating pressure 200 kPa
    pH range 2 – 10
    Maximum allowable free chlorine long term 5 mg/L short term 300 mg/L
    Operating mode dead-end / cross-flow
    Operating temperature <40 ˚C
    Membrane performance 50 kDa MWCO 1.0 x 0.4 mm 0.01 µm pore size
    Membrane material double skin hollow fiber hydrophilic PAN
    Membrane area 1.5 m2
    Flow @ 100 kPa TMP / 25 ˚C - clean water - piped water >5 L/min >1.6 L/min
    Gewicht 3.7 kg